Key Featrues

• ARM CortesTM-M3 Core
• Built-in up to 384Kbytes program flash memory
• Built-in up to 16Kbytes data flash memory
• Internal up to 24Kbytes SRAM for stack, data memory, or code memory
• Operating temperature : -40°C ~ 85°C
• Operating voltage range : 2.7V to 5.5V
• Interrupt controller : Dynamically reconfigurable Nested Vectored Interrupt Controller(NVIC)
• Clock and Power Controller(CM)
• 10CH x DMA Controller(DMAC)
• Watch-Dog Timer(WDT)
• 8CH x 16-bit Timer / Counters(TC)
• 32-bit Free-Running Timer(FRT)
• 8CH x 16-bit PWM
• 2CH x 16-bit Encoder Counter(ENC)
• 2CH x I2C, 2CH x SSP, 2CH x CAN and 4CH x USART
• 12-bit ADC(4channels with OP-AMP)
• 10-bit ADC
• 5CH OP-AMP
• 4com x 40seg LCD Controller(LCDC)
• Support normal, high-speed, IDLE, and stop mode

Key Featrues

• RISC 8051 core : 4 ~ 24MHz at 2.2V to 5.5V
• CPU and Internal logic operation at 1.8V
• Internal RC Oscillator : 32.768 & 8 or 16MHz ±7%
• Embedded Power : 1.8V LDO with LVD
• Memory Controllers
• 32KB NOR Flash and 2KB SRAM
• 24(16)Seg x 4(8)Com TN LCD Driver
• 9ch 10bit ADC
• WDT, WT, 6ch, 8bit Timer & PWM(3ch 16bit Timers)
• Rich Peripherals : 2ch UART, 2ch SPI, IIC
• In-house JTAG based ICE and SDK Suite
• 48TQFP
• 0.18um Process

Key Featrues

• RISC 8051 core : up to 12MHz at 1.9V to 5.5V
• Internal RC Oscillator
• Main : 7.68MHz ±3% at Room Temp.
• Sub : 32.768KHz
• Embedded Power : 1.8V LDO with LVD and POR
• Memory Controllers
• 16KB NOR Flash and 512B SRAM
• 32Seg x 4Com TN LCD Driver
• Battery Level Detector(BLD)
• Carrier Generator for IR Tx
• Simple RTC with interrupt from 256Hz to 24Hours
• Key controller(3ch x 8keys) or used as 5bit ADC
• Timers : 2ch 16bit with PWM, WDT and Watch Timer
• Rich Peripherals : 1ch UART, 1ch SPI
• In-house JTAG based ICE and SDK Suite
• COB-60, 64LQFP with no test
• 0.18um Process

Key Featrues

• RISC 8051 core : 2 ~24MHz at 2.2V to 5.5V
• CPU and Internal logic operation at 1.8V
• Internal RC Oscillator : 16MHz ±20%
• Embedded Power : 1.8V & 3.3V LDO with LVD
• Meomory Controllers
• 384KB e-Flash(Max. 128KB Code memory)and 4KB SRAM
• Up to 1Gbit external Serial Flash expandable
• High Quality Voice and Graphic Controller
• ADPCM Voice Codec with 10bit DAC
• JPEG based Graphic Decoder with x8 decompression and Alpha blending
• Dedicated DMAs
• USB v2.0 Compatible Full Speed Device
• LCD Controllers
• 32Seg x 4Com TN LCD Controller
• i80 CSTN Controller : 8/16/18bit interface
• Rich Peripherals : RTC, UART, SPI, ADC, etc
• In-house JTAG based ICE and SDK Suite
• 80QFP, 68QFN
• 0.13um Process

Key Featrues

• 2-Ch capacitance inputs or 1-Ch capacitance input and differential capacitance input
• Maximum input capacitance : 280pF
• Programmable capacitance span and offset
• Conversion speed : Max 2KHz (@10 bit mode, 2MHz)
• Supply voltage : 2.3V to 5.5V
• Operation temperature : -40℃~125℃
• Temp. Sensor resolution : 0.1℃/1 LSB@12-b mode

Key Featrues

• 12 to 85Mhz Shift clock support
• Low power consumption
• ±1V Common-mode range(around +1.2V)
• UP to 1.785Gbps throughput
• UP to 233 Mbytes/sec bandwidth
• 345mV(typ) swing LVDS devices for low EMI
• PLL require no external components
• Rising edge data strobe
• Low profile 48-lead TSSOP package

Key Featrues

• 12 to 85Mhz Shift clock support
• Low power consumption
• ±1V Common-mode range(around +1.2V)
• UP to 2.38Gbps throughput
• UP to 297.53 Mbytes/sec bandwidth
• 345mV(typ) swing LVDS devices for low EMI
• PLL require no external components
• Rising edge data strobe
• Low profile 48-lead TSSOP package

Key Featrues

• Converting data : AFE signal to Host processor
• 6 lane LVDS Rx and Tx including clock
• Tx/Rx buffer according to user control
• 68QFN package

Key Featrues

• 3-Channel 16-bit Operation up to 40MSPS
• 1-Channel 16-bit Operation up to 36MSPS
• 2-Channel 16-bit Operation up to 36MSPS with Odd/Even Sensor Outputs
• Triple Correlated Double Sampler
• Input Clamp Circuitry
• 1 Point Sampling with CCD Interface
• 3-Channel 13.3MSPS Color Mode
• 1 ~ 6.25 Programmable Gain Amplifier
• 260mv Programmalbe Offset Adjust
• Internal Voltage Reference
• Multiplexed Byte-Wide Data Output(8+8 Format)
• Only MSB 8-bit Data Output(8 Format)
• 3-wire Serial Digital Interface
• 28-SSOP Package
• 3.3V Single Supply Voltage
• Power Dissipation : 280mW Typical
• Power-Down Mode Available

Key Featrues

• 3.3V Power Supply
• 5V change pump output for LED driver
• 2kV HBM ESD
• 48TQFP package with exposed pad
• -40 ~ 150°C Storage Temperature Range

 Key Features

Applications

 Key Features

• Automotive & Industrial CMOS Process for High Reliability
• Low Current Consumption
• Low Voltage Operating IC : 3.0V~5.5V
• Low Noise
• Small Size, Low Cost
• Operating Temperature : -25℃ ~ 85℃
• Storage Temperature : -40℃ ~ 100℃
• Center Frequency : 170KHz
• Detectable Input Current Range (w/ Light Power) : 0.1uA~2uA
• Detectable Input Max Current Level : 10uA
• λp : 750nm ~ 940nm
• Built in Schmitt Trigger
• ESD Protection : HBM 8KV , MM 600V

Applications

• Office Automation Machine (Printer, Copier...)
• ATM, Vending Machine                
• Robot Cleaner
• Object Detect Sensor

Key Featrues

• Automotive & Industrial CMOS Process for High Reliability
• Low Current Consumption
• Low Voltage Operating IC : 3.0 ~ 5.5V
• Low Noise
• Small Size, Low Cost
• Operating Temperature : -25°C ~ 85°C
• Storage Temperature : -40°C ~ 100°C
• Photo Diode Size : 0.04mm2 / 0.09mm2
• Detectable Input Current Range(w/ Light Power) : 0.1uA ~ 2uA
• Detectable Input Max Current Level : 10uA
• λp : 750nm ~ 940nm
• Built in Schmitt Trigger
• ESD Protection : HBM 8KV, MM 600V

Applications

• Office Automation Machine(Printer, Copier...)
• ATM, Vending Machine
• Interrupter
• Object Detech Sensor

Key Featrues

• Automotive & Industrial CMOS Process for High Reliability
• Low Current Consumption
• Low Voltage Operating IC : 3.0 ~ 5.5V
• Low Noise
• Small Size, Low Cost
• Operating Temperature : -25°C ~ 85°C
• Storage Temperature : -40°C ~ 100°C
• Resoultion : 45LPI / 150LPI / 180LPI / 200LPI / 300LPI / 360LPI
• Built in Schmitt Trigger
• ESD Protection : HBM 8KV, MM 600V
• Status : 1st Evaluation passed by customer

Applications

• Office Automation Machine(Printer, Copier...)
• Factory Automation System
• Motor Control
• Robot Cleaner